Quick Answer: How To Bypass The Parking Brake For Kenwood Dvd Player?

How do you bypass DVD parking hookup?

How to Bypass an Automobile DVD Player’s Parking Brake Safety

  1. Pull the unit from your dash (assuming it is installed already).
  2. Find the ground wire (-12 volt).
  3. Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car.

Can I just ground the parking brake wire?

Just wire it to ground. It’s supposed to keep you from playing dvd’s and making calls when the parking brake is disengaged, but you can just keep it constantly fooled by grounding it.

What is PRK SW wire?

Simply twist wire labeled “park” or “parking brake” to your ground wires and it will work flawlessly. *(black)ground wire from deck+(Black)ground wire from wiring harness+ (Light green) wire from deck labeled PRK SW= watch while driving. ( 3 wires total, 2 black 1green) brian. · January 18, 2016.

How do I get my DVD player to work in my car while driving?

There is also a way to overide the dvd player to while the car is in drive. You must ground the parking brake wire on the cd pla … see more. The dvd player will play while the car is in park but the parking brake must be engauged. There is also a way to overide the dvd player to while the car is in drive.

You might be interested:  Readers ask: How To Open A Locked Dvd Case Without Breaking It?

What color wire is the parking brake?

light green wire which is the parking brake wire that comes with the Pioneer harness.

Where does the pink brake wire go?

The white wire should be connected to the white wire. If you want the wall switch to turn off the light/fan, you need to hook the pink wire in the box to the black wire on the controller. You can prevent the switch from turning off the light by connecting black to black.

What is parking single check wire?

“Parking Single Check” – is for the Parking Brake Ground and does mean “single check”. “KEY”, I believe is for a single wire that goes to your steering column that receives (by frequency) all your custom buttons (Vol+/-, Track Next/Previous, etc), programmable in the setup area under steering.

What is a parking brake lead?

The parking brake cable is the cable that many vehicle’s use to engage their parking brakes. The parking brake is used to secure the vehicle so that it will not roll when parked or stationary.

What is Ant cont wire?

#2 · Feb 18, 2006. yes, Ant Cont is for the motor of a power antenna, and you have the amp remote correct. both put out 12 vdc. P Con whenever the unit is on, Ant Con when the radio is on. there is no hookups to improve your FM signal.

What is SWC connector?

SWC is an acronym standing for Steering Wheel Control. An SWC interface is a module that connects a vehicle’s OEM steering wheel controls with an aftermarket headunit or radio replacement unit.

Leave a Reply

Your email address will not be published. Required fields are marked *