- 1 How do you fix a DVD player when it says no disc?
- 2 Why does my DVD player not play some dvds?
- 3 Why won’t my DVD player work on my smart TV?
- 4 Why is my DVD player not working?
- 5 How do I get my DVD player to play on my TV?
- 6 Why does my TV say no signal when I plug in my DVD player?
- 7 What kind of DVD player works with a smart TV?
- 8 Can you connect a DVD player to a smart TV?
- 9 What channel does TV need to be on for DVD player?
- 10 How do you reset a DVD player?
How do you fix a DVD player when it says no disc?
Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.
Why does my DVD player not play some dvds?
A video burned to a DVD must be burned in a specific way. A WMV or AVI movie file burned to a disc will usually not play in most players unless it is converted to another format first. Special programs exist that convert video files to the right format before they are burned so most players can play them.
Why won’t my DVD player work on my smart TV?
Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced.
Why is my DVD player not working?
Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.
How do I get my DVD player to play on my TV?
To connect your TV to your DVD player, plug the included cables ( HDMI and/or composite cable ) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.
Why does my TV say no signal when I plug in my DVD player?
Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.
What kind of DVD player works with a smart TV?
All Blu-ray players have an HDMI output, which allows you to connect your player to the Smart TV.
Can you connect a DVD player to a smart TV?
You’ll need to hook up the DVD player to a smart TV using either an HDMI, composite, component or S-Video cable. Once connected, you need to select the proper source or “input” on your TV to be able to view the DVD player for use.
What channel does TV need to be on for DVD player?
If your television does not offer Audio/Video inputs, you will need to purchase an RF modulator. This will be a small box that will have composite Audio/Video inputs on one side and a Coaxial RF output on the other. This device will allow you to view the DVD Recorder on channel 3 or channel 4.
How do you reset a DVD player?
On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET. Press the ENTER button.