FAQ: How To Program A Rca Remote To A Dvd Player?

How do I program an RCA universal remote control?

Follow these easy steps:

  1. Manually turn on your TV.
  2. Aim your remote at the TV panel and press and hold the TV button.
  3. Once the light is turned on, at the same time, press and hold the “On/Off” button until the light turns on again.
  4. Press the Play or the Slow button on your remote for five seconds.

How do I program a universal remote without a code?

Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.

How do I program my RCA remote to my Blu Ray player?

A step-by-step guide

  1. Turn on the component or device you want to set up, such as your TV or Blu-ray player.
  2. Press and release the TV button.
  3. Now, simultaneously press and hold the TV button and the On/Off button.
  4. Release both buttons after the On/Off button relights.
You might be interested:  Quick Answer: Where To Buy Old Movies On Dvd?

Where is the code search button on a RCA universal remote?

You’ll need to keep the remote pointed at the device as you program. Press and hold the Code Search button until the light turns on. This button is usually at the top of the remote. When the light comes on, you can let go of the button.

What are the codes for RCA universal remote?

Universal Remote Control Code List For RCA Remote Controls

  • Abex TV 1172.
  • Admiral TV 1001, 1046, 1047, 1083, 1095, 1173, 1191, 1211.
  • Admiral VCR 2001.
  • Advent TV 1005, 1062, 1219, 1238, 1291.
  • Adventura TV 1174.
  • Adventura VCR 2026.
  • Aiko TV 1016.
  • Aiko VCR 2027.

How do I program my 3 RCA universal remote?

Programming Using the Brand Code Search:

  1. Manually turn on the device you want to control.
  2. Press and hold the DVD•VCR key.
  3. Find your device’s brand in the Brand Code list section of the accompanying code list.
  4. Press and hold the device key you want to program.
  5. Wait until the POWER key comes on and stays on.

How do I program a universal remote to my TV?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I program my RCA universal remote to my Sony DVD player?

Press and hold the Code Search button while pressing the device button that you want to pair. For example, you’re pairing your remote with a new TV, choose the TV key. If you want to pair your remote with a DVD player, press the code search button at the same time as the DVD button.

You might be interested:  Readers ask: When Is The Hunger Games Coming Out On Dvd?

How do u program a universal remote to a Blu Ray player?

How to program a universal remote to a DVD player, Blu Ray player, or TV:

  1. Turn on the device.
  2. On the remote control, press the corresponding device button – “TV”, “DVD” or “AUX.”
  3. Press and hold the “RCU SETUP” button until the device key blinks twice.
  4. Press “9” “9” “0” using the number pad on the remote.

How do you reset an RCA universal remote?

Why is my RCA remote not working? Reset the remote. Remove the batteries, then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote. If it lights up, reprogram the remote and try again.

How do I find my TV remote code?

How to Find a Code for My Remote Control

  1. Look through the User’s Manual for your remote control to find the code section.
  2. Go to an website listing code, such as the Remote Code List (See References).
  3. Call the manufacture of your remote and ask whether it can tell you the codes you need.

Leave a Reply

Your email address will not be published. Required fields are marked *