FAQ: How To Connect Dvd Player To Cable Box?

Can I hook up my DVD player to my cable box?

You can’t hook a DVD to a cable box. It doesn’t have inputs. If the cable box is connected to the antenna jack on the TV and that’s the only connection you will need an AV RF modulator.

How do I connect my DVD recorder to my cable box and TV?

Connecting to Cable TV using a Cable Box

  1. Connect Audio (red/White) and Video (Yellow) OUT on the DVD recorder to the Television Audio / Video IN.
  2. Connect the HDMI OUT on the DVD Recorder if one is available to the Television HDMI IN.
  3. Connect S-Video OUT on the DVD Recorder to the S-Video IN on the TV.

How do I connect my DVD player to my Xfinity cable box?

Connect Your Xfinity TV to Your DVD or VCR Player

  1. Make sure your Xfinity TV and DVD or VCR player are both tuned to channel 2, 3, or 4 (depending on your converter).
  2. Connect the wires so the cable signal passes from the main source to the converter box, then to your television. Connect your DVD/VCR using the inputs.
You might be interested:  Often asked: How To Play Dvd Without Remote Sony?

How do you hook up a VCR and DVD player to a smart TV?

S-Video. Connect an S-Video cable to the “S-Video Out” port on your VCR/DVD combo player. Plug the opposite end of the S-Video cable to the “S-Video In” port on your TV. Connect a set of RCA audio cables to the red and white color-coded “Audio Out” jacks on your VCR/DVD combo player.

How do you hook up a VCR to a smart TV with a cable box?

Connect a second coaxial cable on the back of the cable box using the “ RF OUT” and connect the other end of this cable to the back of the VCR using the “RF IN” jacks. Connect the third coaxial cable to the back of the VCR in the “RF OUT” with the other end connected to the back of the television’s “RF IN” jack.

How do I connect my DVD player to my HDMI TV without HDMI?

Connect the composite video cable (Yellow RCA) to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the composite cable and audio cables and connect them to your TV.

Can I connect an old VCR to a new TV?

The short answer is yes! Most VCRs can hook up to most modern TVs, though you might have to buy a cable or two. For a long time, VCRs used coaxial cables. Those are basically the same cables that come out of your wall to plug in a cable or satellite box.

You might be interested:  Often asked: How To Make A Photo Dvd?

How can I play VHS tapes on my TV?

A Quick List of Your Cable Options

  1. HDMI Converter Box: The easiest (and most expensive) way to play VHS tapes on a big screen.
  2. S-Video: If your TV and VCR have S-Video ports (your TV probably doesn’t), use S-Video.
  3. RCA: Even some new TVs have an RCA port, and you probably have a few RCA cables lying around.

How do you hook up a old DVD player to a smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

Leave a Reply

Your email address will not be published. Required fields are marked *